Introducing Mobula8 - 1-2S 85mm Micro FPV Whoop Drone for Outstanding Power Performance
Upgrade your flying experience to a whole new level with the Mobula8 whoop drone by Happymodel - designed for advanced power and smooth flight. Prepare to be amazed by the cutting-edge X12 series flight controller, powerful EX1103 KV11000 motor, and versatile Gemfan Hurricane 2023 tri-blade propeller. Mobula8 is perfect for both backyard flying and ripping through diverse terrains.
Key Features
- X12 5-IN-1 AIO flight controller with integrated 2.4G ELRS V2.0 and OPENVTX
- VTX Power up to 400mw
- ELRS V2.0 firmware provided (Upgradeable to ELRS V3.0)
- Powerful and smooth EX1103 KV110000 motors
- High-quality CaddxFPV Ant FPV camera
- Compatibility for 1S-2S Lipo/LIHV battery
- Recommended 2S 450mah/550mah/650mah battery (Not included)
Specifications
Manufacturer: Happymodel
Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
Wheelbase: 85mm
Dimensions: 120mm*120mm*50mm
Weight: 43g
Receiver Options
- 2.4G ELRS SPI (Support ELRS v2.0, provide firmware for compatibility with ELRS v3.0)
- SPI Frsky D8/D16 (not compatible with EMAX E6 radio)
- SPI Flysky AFHDS2A
- PNP (without onboard receiver)
- TBS version (with external TBS CRSF NANO RX)
EX1103 KV11000 Brushless Motor
Mode: EX1103 KV11000
Configuration: 9N12P
Stator Diameter: 11mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension (Dia.*Len): Φ13.5mm*15.5mm
Weight: 3.8g
No. of Cells (Lipo): 1-2S
Gemfan Hurricane 2023 Tri-Blade Propellers (4CW + 4CCW)
Weight: 0.88g
Material: PC
Pitch: 2.3in
Props Diameter: 52.17mm
Center Thickness: 5mm
Center Hole Diameter: 1.5mm
For a more detailed list of specifications, please refer to the text provided above.
Package Contents:
The package includes a single Happymodel Mobula8 RC Drone, designed to offer you an incredible flying experience. Unleash the power of the Mobula8 and take your backyard flying adventures to new heights!
Product Specifications
EX1103 KV11000 brushless motor |
Mode: EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
Weight(g):3.8g
No.of Cells(Lipo):1-2S |
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) |
Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm |
X12 5-IN-1 AIO flight controller |
X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor |
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Firmware target: Z_H_30
Default protocol: DSHOT300
Support Bluejay firmware
|
Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware
Could flash FC firmware to support ExpressLRS v3.0 TX module |
Onboard SPI Frsky D8/D16 receiver Versio |
SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support |
Onboard SPI Flysky receiver Version |
SPI BUS receiver
Protocol: AFHDS-2A
Channels: 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support |
PNP Version
(without onboard receiver) |
Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input |
External TBS CRSF Nano receiver version |
Original TBS Receiver ,CRSF Protocol , Official TBS transmitter compatible |
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw) |
Caddx ANT 1200tvl camera |
Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Weight: 2g (N.W.)
|
Product Images
Free
3-7 Day
Tracked Delivery
Easy 30 Day Returns
New Year Event - Best Price Guarantee
